Wiring Tips; Control Elements - Behringer Ultrabass BT108 User Manual

5
ULTRABASS BT108 User Manual

2. Wiring Tips

Figures 2.1 and 2.2 show you how to connect your bass to the amplifier.
If you want to use an effects unit (for example, the BEHRINGER X V-AMP PRO) to
experiment with some out-of-the-ordinary sounds, you can connect your bass
directly to the input of the unit. Then, connect a second cable from the effects
output to the input on your bass amp.
If you have an electronic tuner, please be sure to insert it pre effects device,
so that the tuner only receives a dry signal without effects components.
X V-AMP PRO: no additional tuner required.
◊
The built-in loudspeaker is disabled automatically when you plug in
the headphones.
BEHRINGER
X V-AMP
ADJUST
1
2
3
4
GAIN / VOLUME
Output
COPY 2 ND FUNCTION
CONFIGURE PEDAL
BASS EQ PRESENCE
BYPASS/TUNER
Input
Instrument
input
E-Bass
Fig. 2.1: Example of a setup using the ULTRABASS BT108

3. Control Elements

(1) (2)
Fig. 3.1: Upper side: Control elements
CD Player
BEHRINGER
HPS3000
CD Player
Input
Headphone
BEHRINGER
ULTRABASS BT108
(3) (4) (5)
Fig. 2.2 shows a recommended setup for amplifying the sound of your BT108
using a sound reinforcement system of any size. This way, you can also use your
amp for playing live or for rehearsals with your band.
BEHRINGER
EUROLIVE B1520
BEHRINGER
BASS V-AMP
Outputs
Input
Instrument In
E-Bass
Fig. 2.2: Live setup
(6) (7) (8)
BEHRINGER
EUROPOWER
EP1500
Main
Outputs
BEHRINGER
EURORACK
UB1222FX-PRO
Headphone
BEHRINGER ULTRABASS BT108
(9)