Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Hotpoint HDR190I
Summary of Contents for Hotpoint HDR190I
- Page 1 Instructions for Installation and Use Fridge Model HDR190I...
- Page 2 Retention of this Instruction Book This Instruction Book must be kept handy for reference as it contains important details on the safe and proper use of the appliance. If you sell or pass the appliance to someone else, or move house and leave it behind, make sure this Book is also provided so the new owner can become familiar with the appliance and safety warnings.
- Page 3 Contents Positioning and connection Overall view Starting the appliance Chiller system Using the refrigerator to its full potential Switching the appliance off Cleaning the appliance Avoiding mould and unpleasant odours Defrosting the appliance Replacing the light bulb General safety Disposal...
-
Page 4: This Appliance Must Be Earthed
1. Install the appliance on a level and rigid floor. 2. If the floor is not perfectly horizontal, adjust the refrigerator by tightening or loosening the front feet. After the appliance has been transported, carefully place it vertically and wait at least 3 hours before connecting it to the electricity mains. - Page 5 Fitting a new plug IMPORTANT WIRES IN THE MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE... Green and Yellow - Earth Blue - Neutral Brown - Live As the colours of the wires in the mains lead may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: Connect Green and Yellow wire to terminal marked...
-
Page 6: Temperature Control
The instructions contained in this manual are applicable to different model refrigerators. The diagrams may not directly represent the appliance purchased. For more complex features, consult the following pages. box with • containers • Varies by number and/or position. Available only on certain models. FRUIT and TEMPERATURE CONTROL... - Page 7 = warmest We recommend, however, a medium position. : two practical The “cooling section” of the refrigerator is located inside the back wall of the compartment, providing increased space and improved aesthetics. The back wall will be covered in frost or water droplets depending on whether the compressor is operating or paused.
- Page 8 • The appliance is manufactured with hygienic materials which are odour free. In order to maintain an odour free refrigerator and to prevent the formation of stains, food must always be covered or sealed properly. • If you want to switch the appliance off for an extended period of time, clean the inside and leave the doors open.
- Page 9 If circulation is impeded, the compressor will work continuously. • Do not place hot food directly into the refrigerator. The internal temperature will increase and force the compressor to work harder and will consume more energy.
- Page 10 • The doors are opened too frequently. • The TEMPERATURE ADJUSTMENT knob is not in the correct position • The refrigerator have been over-filled. • The TEMPERATURE ADJUSTMENT knob is not in the correct position. • The door is not closed properly or is continuously opened.
- Page 11 THIS GUARANTEE WILL NOT APPLY IF THE APPLIANCE HAS BEEN USED IN COMMERCIAL OR NON-DOMESTIC PREMISES. Hotpoint also offers you a free 5 year parts guarantee. This additional guarantee is conditional on you registering your appliance with us and the parts being fitted by one of our authorised engineers. There will be a charge for our engineer's time.
-
Page 12: After Sales Service
No one is better placed to care for your Hotpoint appliance during the course of its working life than us - Essential Contact Information We are the largest service team in Europe offering you access to 400 skilled telephone advisors and 1100 fully qualified engineers on call to ensure you receive fast, reliable, local service.