Installing A Child Seat With Latch - Honda RSX 2005 Owner's Manual

Main Menu Table of Contents
Installing a Child Seat
Installing a Child Seat with
LATCH
Your vehicle is equipped with
LATCH (Lower Anchors and
Tethers for Children) at the rear
seats.
The lower anchors are located
between the seat-back and seat
bottom, and are to be used only with
a child seat designed for use with
LATCH.
The location of each anchor is
indicated by a small button above the
anchor point.
36
LOWER ANCHOR
MARKS
LOWER ANCHORS
To install a LATCH-compatible child
seat:
Move the seat belt buckle or
1.
tongue away from the lower
anchors.
2. Make sure there are no objects
near the anchors that could
prevent a secure connection
between the child seat and the
anchors.
Rigid type
3. Place the child seat on the vehicle
seat, then attach the seat to the
lower anchors according to the
child seat maker's instructions.
Some LATCH-compatible seats
have a rigid-type connector as
shown above.