Connecting Batteries To The Charger - FCI CHG-120 Instruction Manual

Installing the Charger
Warning: Do not
!
connect the Battery
Interconnect Cable
at this time.
Refer to "Starting the
Charger" on page 15.
6

Connecting Batteries to the Charger

Overview you can connect 25 AH –120 AH batteries to the charger. This section provides
illustrations and instructions for connecting two batteries or for connecting four batteries.
Connecting Two Batteries Figure 5 shows how to connect two 25 AH batteries to the
charger:
TB1
Figure 5 Connecting 25 AH Batteries
Table 3 contains instructions for connecting batteries to the charger:
Step Action
1 Remove all power sources to the charger.
2 Connect the battery negative cable to the TB2 terminal (on the charger
labeled "Battery –" as shown in Figure 5.
3 Connect the battery positive cable to the TB2 terminal (on the charger)
labeled "Battery +" as shown in Figure 5.
4 Proceed to the section "Connecting the Charger." Do not connect the Battery
Interconnect Cable at this time—refer to "Starting the Charger" on page 15.
Power Supply
Table 3 Connecting 25 AH Batteries
CHG-120 Instruction 11/22/04 PN: 52459:A FCI P/N:9000-0572
Connecting Batteries to the Charger
TB2
CHG-120