Download Print this page

CEN-TECH 90980 Assembly & Operating Instructions

16” laser level, 360° rotating head

Download this manual

16" LASER LEVEL

WITH 360 ° ° ° ° ° ROTATING HEAD

90980

ASSEMBLY & OPERATING INSTRUCTIONS

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web Site at www.harborfreight.com

2003 by Harbor Freight Tools

any artwork contained herein may be reproduced in any shape or form without the

express written consent of Harbor Freight Tools.

For technical questions and replacement parts please call 1-800-444-3353.

Page 1 . All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions and replacement parts please call 1-800-444-3353.
Page 2 HANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please complete the owner’s record below: Model______________ Serial No._____________ Purchase Date_______________ SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read the entire manual to become familiar with the unit BEFORE you begin assembly.
Page 3 Note: The Bulls-Eye Bubble (19) is intended for initial leveling of the Rotating Head (7) only. After placing the Plastic Body (5) into the tripod slot, further leveling should be done using the Horizontal Bubble (4) as a reference. REV 03/04 SKU 90980 Page 3...
Page 4 CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. REV 03/04 SKU 90980 Page 4...
Page 5 Rotating Head Adjusting Knob Battery Spring Knob On/Off Button Handle Bulls-Eye Bubble Assembly/Parts Diagram 4 5 6 Note: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. SKU 90980 Page 5...