Graco Child Restraint Owner's Manual page 34

5 Attach harness straps
to splitter plate.
For Infants or Small Toddlers:
(When using harness slot 1)
Slot
• Put Top right strap loop on splitter plate first,
5
then attach Top left strap loop (fig. g - fig. h).
Slot
OR
4
(When using harness slots 2 or 3)
Slot • Put Middle right strap loop on splitter plate first,
3
then attach Middle left strap loop. (fig. j - fig. k).
Slot
NOTE: Make sure ends of straps are in front of
2
splitter plate (fig. i or fig. l).
Slot
1
For Toddlers:
(When using harness slots 4 or 5)
• Put Bottom right strap loop on splitter plate
first, then attach Bottom left strap loop (fig. m - fig. n).
CHECK that the loops are completely within the splitter plate
(fig. o).
Top
Loop
Middle
Loop
Bottom
Loop