Lcd Projector - Panasonic PT-VW431D Spec File

S F
P E C I L

LCD Projector

COMPUTER (RGB) 2 IN / 1 OUT
VIDEO IN
S-VIDEO IN
COMPUTER AUDIO IN 1
COMPUTER AUDIO IN 2 / MIC IN
VIDEO/S-VIDEO AUDIO IN
AUDIO OUT
SERIAL IN
LAN/DIGITAL LINK
Power cord length
Cabinet materials
Dimensions (W × H × D)
Weight
Operation noise
Operating temperature
Operating humidity
Remote control unit
Power supply
Operation range* 6
Dimensions (W × H × D)
Weight
Supplied accessories
Optional accessories
Replacement lamp unit
Replacement filter unit
Ceiling mount bracket
Bracket assembly
Digital interface box
Weights and dimensions shown are approximate. Specifications subject to change without notice.
* 1 When the is set to
STANDBY MODE
can be received for external control using the serial terminal.
* 2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
* 3 WUXGA resolution is supported only when the signals are compliant with VESA CVT-RB (Coordinated Video Timing-Reduced Blanking).
* 4 With legs at shortest position.
* 5 Protruding parts not included.
* 6 Operation range differs depending on environments.
As of September 2012
SFL12M015
E
R, G, B D-sub HD 15-pin (female) × 1
(input/output selectable using on-screen menu.)
G: 0.7 Vp-p (1.0 Vp-p for sync on G), 75 ohms;
B, R: 0.7 Vp-p, 75 ohms;
HD/VD, SYNC: high impedance, TTL (positive/negative)
NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
RCA pin × 1, 1.0 Vp-p, 75 ohms
Mini DIN 4-pin × 1, Y: 1.0 Vp-p; C: 0.286 Vp-p, 75 ohms
M3 (L, R) × 1, 0.5 Vrms
M3 (L, R) × 1, 0.5 Vrms
RCA × 2 (L/R × 1), 0.5 Vrms
M3 (L, R) × 1 (monitor out: 0 – 2.0 Vrms, variable)
D-sub 9-pin (female) × 1, for external control (RS-232C compliant)
RJ-45 × 1, for network connection/DIGITAL LINK, 100Base-TX/10Base-
T, compliant with PJLink™
2.0 m (6 ft 7 in)
Molded plastic
379 × 107 *
(14-29/32 × 4-7/32 *
Approximately 4.8 kg (10.6 lbs)
37 dB (
0 – 40 °C (32 – 104 °F)
20%– 80% (no condensation)
3 V DC (R03/LR03/AAA type battery × 2)
Approximately 7 m (23 ft) when operated from directly in front of the
signal receptor
52 × 110 × 18 mm (2-1/16 × 4-11/32 × 23/32 inches)
Approx. 67 g (2.4 oz) (including batteries)
Power cord (× 1) (× 2 for PT-VW431DEA)
AC power cord holder (× 1)
Wireless remote control unit (× 1)
Batteries for remote control (R03/LR03/AAA type × 2)
Carrying bag (× 1)
Computer cable (1.8 m (5 ft 11 in), for VGA) (× 1)
Software CD-ROM (Logo Transfer Software, Multi Projector Monitoring
ET-LAV200
ET-RFV200
ET-PKV100H (for high ceilings)
ET-PKV100S (for low ceilings)
ET-PKV200B
ET-YFB100
, network functions such as power on over the LAN network will not operate. Also, only certain commands
ECO
4 × 305* 5 mm
4 × 12* 5 inches)
: ), 29 dB (
LAMP POWER NORMAL
and Control Software) (× 1)
PT VW431D
: )
LAMP POWER ECO
3 / 1 3