Table of Contents
Advertisement
Charging Your Handheld Terminal's Battery
The cradle may also be used to charge the handheld terminal's battery. To charge the
terminal's battery:
1. Ensure the cradle is powered on.
2. Insert the terminal in the cradle as shown.
a. The Terminal Battery Charge LED wi
"Slow Blink Amber" to indicate that
the terminal is charging.
b. When the terminal has completed
charging, the light will turn "Solid
Amber" to indicate the battery is
fully charged (approximately 4
hours).
c. If the terminal shows a "Fast
Blinking Amber" light, there is an
error in charging. Reseat the
terminal in the cradle to see if that
fixes the issue.
d. If you do not see a charging light,
the terminal may not be placed in
the cradle correctly, or the cradle
may not have any power.
Charging Your Spare Battery
To charge the terminal's spare battery:
1. Orient the battery so that the charging contacts are facing down and toward the right
side of the cradle
2. Insert the battery in the spare battery charging slot in the rear of the cradle as
shown. Then gently press down on the battery to ensure proper contact.
CradlePoint USB/E thernet Charging Cradle User Guide
ll
a. The Spare Battery Charge LED will "Slow Blink
Red" to indicate the battery is charging.
b. When the LED turns "Solid Red" the battery
is fully charged. A standard battery is
fully charged in less than 4 hours and
less than 6 hours for the Extended
Life Battery.
CradlePoint, Inc
c. If the LED shows a "Fast
Blinking Red" you have a
problem with charging.
Check to see if the spare
battery is inserted
correctly.
6
Advertisement
Table of Contents
