Important Information - Hunter WHISPERWIND2000 Installation And Operation Manual

®

IMPORTANT INFORMATION

CAUTIONS
• Read entire booklet care-
fully before beginning in-
stallation.
• To reduce the risk of per-
sonal injury, attach the fan
directly to the support
structure of the building
according to these instruc-
tions, and use only the
hardware supplied.
• Save these instructions.
WARNINGS
• To avoid possible electrical
shock, before installing
your fan, disconnect the
power by turning off the
circuit breakers to the out-
let box and associated wall
switch location. If you can-
4
not lock the circuit break-
ers in the off position, se-
curely fasten a prominent
warning device, such as a
tag, to the service panel.
• All wiring must be in accor-
dance with national and lo-
cal electrical codes and
ANSI/NFPA 70- 1993. If you
are unfamiliar with wiring,
you should use a qualified
electrician.
• To reduce the risk of per-
sonal injury, do not bend
the Speed Ring™ blade at-
tachment system when in-
stalling, balancing, or
cleaning the fan. Never in-
sert foreign objects be-
tween rotating fan blades.
• To reduce the risk of fire,
electrical shock, or motor
damage, do not use a solid-
state speed control with
this fan. Use only Hunter
speed controls.
DO YOU NEED HELP?
To install a ceiling fan, be sure you
can do the following:
• Locate ceiling joist or other suit-
able support in ceiling.
• Drill holes for and install wood
screws.
• Identify and connect electrical
wires.
• Lift 40 pounds.
If you need help installing the fan,
your Hunter fan dealer can direct you
to a licensed installer or electrician.
41277-01 05/98