Connecting To Other Devices; Connecting To Devices Which Control The Projector - JVC D-ILA G1000 Instructions Manual

Connecting to Various Devices (Cont.)

Connecting to Other Devices

Before connection, be sure to turn off both the projector and other devices to be connected.
• Read the manual thoroughly which comes with the device to be connected.
• Speakers with a built-in amplifier and game devices can be connected. Use the AV connection cable and audio cable supplied,
or the cable supplied with a game device.
Y/C
AUDIO
L
R
REMOTE
RS-232C

Connecting to Devices which Control the Projector

Before connection, be sure to turn off both the projector and devices to be connected.
• Read the manual thoroughly which comes with each device to be connected.
• By connecting a computer to the RS-232C terminal, you can control the projector. Also, you can make an infrared remote
sensor extension unit and connect it to the REMOTE terminal of the projector.
* Obtain connection cables as required.
* For details, consult a authorized your dealer or service center.
• Desktop type
• Note type
G1000[D] p.15-25
BNC-RCA conversion plug (supplied)
To VIDEO
VIDEO
To AUDIO (L)
Y Y
P /B-Y
B
To AUDIO (R)
P /R-Y
R
Cable supplied with the game
AUDIO OUT
device, or supplied AV connection
cable
• Speakers with a built-in amplifier
To AUDIO OUT
Audio cable (supplied)
(or stereo mini-plug)
To RS-232C connector
To RS-232C connector
21
• Game device, etc.
RS-232C reverse connection
cable (separately available)
To RS-232C connector
To REMOTE terminal
Infrared remote
sensor extension unit
(Needs to be made)
99.2.24, 5:50 PM
Y/C
AUDIO
PC
AUDIO
AUDIO
R L
H/C
G S R
V
B
COMPUTER
OUT
REMOTE
RS-232C
21