Problem: An Analog Signal Of A Very Faint Strength Cannot Be; Accurately Recreated By A/D And D/A Conversion. (1 - JVC RX-D702 Technical Manual

CC Converter CC Converter

Problem: An analog signal of a very faint strength cannot be

Problem: An analog signal of a very faint strength cannot be

accurately recreated by A/D and D/A conversion. (1)

accurately recreated by A/D and D/A conversion. (1)
RX-D702
When its level is high, a 1kHz signal can produce a smooth waveform after the A/D and D/A
conversion. When the level is low, however, a stepped waveform results due to the limitation
in the resolution of a digital signal. This phenomenon occurs because digital quantization
distortion increases as the levels are reduced.
A/D and D/A Conversion in Amplitude Domain
< 20 >