Australia only, suitable for flush wood medium & flush wood large hybrid-fyre inserts, dvl, dvs gs2 & radiant plus large gas inserts (11 pages)
Summary of Contents for Lopi Hearthview 864
Page 1
Hearthview (864) Wilmington Face Pewter 99300495 Black 99300496 Compatibility: Packing List: • 864TRV Fireplace • Face • 864ST Fireplace • Glass Frame Cover • 864HO Fireplace • Aromatherapy Bracket • Face Baffle • (2) Upper Face Brackets (w screws attached) •...
Page 2
Hearthview (864) Wilmington Face Pewter 99300495 Black 99300496 Special Instructions for 864HO Fireplaces The Wilmington face requires the outer grill deflectors to be removed to allow for installation of the face mounting brackets. Once the brackets are installed, replace the deflectors. See the instructions below. Remove the outer deflector on both sides (use needle-nose pliers if necessary).
Hearthview (864) Wilmington Face Pewter 99300495 Black 99300496 Installation 1 Install the fireplace brackets onto the fireplace following the directions below. Remove and discard the nuts and bushings above and below the firebox. Discard the stock bushings and nuts. Upper Bracket Place the upper and lower brackets in place and secure using the nuts included with this...
Page 5
Hearthview (864) Wilmington Face Pewter 99300495 Black 99300496 3 Attach the face baffle and face brackets following the directions below. Face Baffle Attach the upper face brackets to the face with the included nuts. Loosen these upper nuts and slide the face baffle over the studs.
Page 6
Hearthview (864) Wilmington Face Pewter 99300495 Black 99300496 4 Install the face following the directions below. Slide the face into place. The tabs on the upper brackets insert into the slots on the fireplace brackets, holding the face in place while the screws are tightened.
Page 7
Hearthview (864) Wilmington Face Pewter 99300495 Black 99300496 Aromatherapy Option - Modification Details The instructions below details preparation of the aromatherapy tray and the installation of the extension. Refer to the aromatherapy kit for details on use of this kit. 1 Prepare the aromatherapy bracket following the directions below.
Page 8
Hearthview (864) Wilmington Face Pewter 99300495 Black 99300496 3 Remove the keystone and discard the retainer plate following the directions below. Remove and Aromatherapy Tray discard this plate. Plate Keystone Attach the aromatherapy tray to the keystone following the directions below. Aromatherapy Tray Keystone NOTE: Hand-tighten these nuts.
Page 9
Hearthview (864) Wilmington Face Pewter 99300495 Black 99300496 Attach the extension assembly following the directions below. Slide the extension assembly into place (it is installed from behind the face). Secure the extension assembly with two 8-32 nuts (included with the aromatherapy kit). NOTE: The studs on the aromatherapy bracket Extension Assembly...
Page 10
Hearthview (864) Wilmington Face Pewter 99300495 Black 99300496 Slide the tray into the extension assembly following the directions below. Slide the extension assembly all the way out. Tilt the tray upwards and insert this notch under the rollers. Tilt the tray level to complete the installation.