Table of Contents
Advertisement
Table of Contents
Warnings & Important Safety Instructions _______________________________________________3
Dimensions _________________________________________________________________________6
Specifications _______________________________________________________________________7
Clearance Dimensions (Proximity to Cabinets) ___________________________________________8
Clearance Dimensions (Wood/Composite Overlay) ______________________________________9
Electrical & Gas Requirements _______________________________________________________10
General Information ________________________________________________________________12
Installation _________________________________________________________________________13
Door Removal __________________________________________________________________13
Leg Installation _________________________________________________________________14
Leveling/Adjustments/Alignment _________________________________________________15
Anti-tip Device Installation _______________________________________________________16
Connecting Gas & Electric _______________________________________________________17
Standoff Bracket Removal ________________________________________________________18
Final Installation ________________________________________________________________18
Door Replacement and Adjustment _______________________________________________19
Final Preparation ___________________________________________________________________20
Performance Checklist ______________________________________________________________20
Service & Registration_______________________________________________________________21
2
IMPORTANT-
Read and Follow!
• Before beginning, please read these
instructions completely and carefully.
• Do not remove permanently affixed labels,
warnings, or plates from product. This may
• All local and national codes and ordinances
must be observed. Installation must
conform with local codes or in the absence
of codes, the National Fuel Gas Code ANSI
Z223.1 INFPA54.
• The installer must leave these instructions
with the consumer who should retain for
reference.
In Canada: Installation must be in accordance
with the current CAN/CGA B149.1 & 2 Gas
Installation codes and/or local codes. Electrical
installation must be in accordance with the
Part 1 and/or local codes.
In Massachusetts: All gas products must be
COULD result in minor personal injury or
installed by a "Massachusetts" licensed
plumber or gasfitter. A "T" type handle
manual valve must be installed in the gas
supply line to the appliance.
3
Your safety and the safety of others is
very important.
We have provided many important safety
messages in this manual and on your
appliance. Always read and obey all
safety messages.
This is the safety alert symbol. This
symbol alerts you to hazards that
can kill or hurt you and others.
All safety messages will be preceded by
the safety alert symbol and the word
"DANGER," "WARNING" or "CAUTION."
These words mean:
DANGER
Hazards or unsafe practices
which WILL result in severe personal
injury or death
WARNING
Hazards or unsafe practices
which COULD result in severe personal
injury or death
CAUTION
Hazards or unsafe practices which
property damage.
All safety messages will identify the
hazard, tell you how to reduce the chance
of injury, and tell you what can happen if
the instructions are not followed.
Advertisement
Table of Contents
