Lenovo Ideapad Z560 Hardware Maintenance Manual page 74

Ideapad Z560/Z565 Hardware Maintenance Manual
70
Note: Applying labels to the base cover
The new base cover FRU is shipped with a kit containing labels of several
kinds. When you replace the base cover, you need to apply the following
label:
The following labels need to be peeled off from the old base cover, and need
to be put on the new base cover.
a PRC CODE label
b COA label
c Rating label
d ENERGY label
For some models, you also need to apply one or two FCC labels. Check the
old base cover; if it has one or two FCC labels, find duplicates of them in the
label kit and apply them to the new base cover.
For the location of each label, refer to the following figure:
a
b
c
d