Connect the extension to the first power connector of both system power cables.
b.
Connect the power connectors on the power cable extension to any installed media bay devices. Route
19.
the unused portion of the system power cables to avoid airflow restriction.
Install any other expansion boards
20.
Slide the hard drive cage back into the chassis, and then secure the cage with the four T-15 screws.
21.
Install the access panel (on page 27).
22.
Do one of the following:
23.
Close or install the tower bezel, as needed.
o
("Installing an expansion
board" on page 70).
Hardware options installation 77