Adjusting The Audio Settings - Vizio M492i-B2 User Manual

ADJUSTING THE AUDIO SETTINGS

To adjust the audio settings:
1. Press the MENU button on the
remote. The on-screen menu
is displayed.
2. Use the Arrow buttons on the
remote to highlight Audio and
press OK. The AUDIO menu
is displayed.
3. Use the Arrow buttons
highlight the setting you wish
to adjust, then press
Right Arrow buttons to change
the setting:
• TV Speakers - Turns the
built-in speakers on or off.
When the TV speakers are set to On, DTS signals
cannot be passed through digital audio outputs.
• Surround Sound - Surround sound uses DTS TruSurround
to deliver an immersive surround sound experience from
the TV's internal speakers. TruSurround completes the
entertainment experience by providing deep, rich bass
and by delivering crisp details and clear, intelligible dialog.
Select On or Off.
• Volume Leveling - Volume leveling uses DTS TruVolume
to maintain consistent volume levels during transitions
between program content, AV formats, and input sources.
Select On or Off. In a few cases, volume leveling may
artificially suppress volume increases, making it difficult to
hear dialog or flattening sudden noises. If this occurs, turn
volume leveling off.
• Balance - Adjusts the loudness of the audio output from
the left and right speakers.
VIZIO
AUDIO
TV Speakers
Surround Sound
Volume Leveling
-
Balance
-
Lip Sync
Digital Audio Out
to
Analog Audio Out
Equalizer Settings
Left/
Delete Audio Mode
• Lip Sync - Adjusts the synchronization between the display
image and the accompanying audio track.
• Digital Audio Out - Changes the type of processing for
digital audio out and HDMI ARC output when connected
to a home theater audio system. Select PCM or Bitstream.
Wide Zoom You must select Bitstream for audio with more than Normal
On
two channels (3.0, 5.0, or 5.1, for example).
On
On
+
0
• Analog Audio Out - Sets the volume control properties for
+
Exit 2D 3D
0
the RCA connector when connected to a home theater
PCM
audio system. Select Variable if you are controlling the
Fixed
ABC
volume with the TV's volume controls, or select Fixed if
an external audio device (sound bar or AV receiver) will
Input Wide CC
control the volume.
• Equalizer Settings - Adjusts the boost or attenuation of
different frequencies using either preset or custom settings.
See Changing the Equalizer Settings on page 33.
Sleep
Picture Audio
Timer
• Delete Audio Mode - Deletes a custom audio mode
created using the Equalizer Settings. See Deleting the
Custom Audio Mode on page 33 .
4. When you have finished adjusting the audio settings, press Network Settings Help
™
the EXIT button on the remote.
™
32
Panoramic
5