Vehicle Frame - Power Wheels Kawaaki Super Shock 73600 Owner's Manual And Assembly Instructions

9
See
Inset
Lower
Shock Rod
Top View
Assembly
Lower
Hole
Lower Shock Rod
Right Side View
• Lower the moveable
top piece of the

vehicle frame.

• Slide the lower shock
rod into the lower hole
in the vehicle frame,
through the lower
portion of the mono-
shock and out through
the other side of the
vehicle frame.
Hint: You may want to
hold the monoshock in
position to fit the lower
shock rod through it.
10
End of Lower
Shock Rod
.437 Cap Nut
Left Side View
• Fit a .437 cap nut on the other end of the lower shock rod.
• Tap the cap nut with a hammer to secure the cap nut on
the frame axle. Pull on the cap nut to be sure it is secure.
Hint: You may need the help of another adult to support the
other end of the lower shock rod while you tap the
cap nut.
11
Upper
Shock Rod
• Place a .437 cap nut on a flat surface, inside up,
as shown.
Hint: You may want to place a scrap block of wood
underneath the cap nut to protect the assembly surface.
• Fit the upper shock rod into the cap nut.
• Tap the opposite end of the upper shock rod with a
hammer to secure the cap nut in the upper shock rod.
Pull on the cap nut to be sure it is secure.
12
.437 Cap Nut
.437"
.437 Cap Nut
.437 Cap Nut
.437"