Ultra Products eXo User Manual page 3

7. Installation is now complete and the side window
should appear.
Clicking on Finish will allow you to use the eXo.
8. When the registration is completed,
the eXo will appear listed
in the Bluetooth® devices list.
VII. Pairing the eXo with your MAC (with built in Bluetooth®):
1. Click on the Apple Menu and choose System Preferences.
2. Click on the Bluetooth® icon.
3. In the Bluetooth® window ensure the
following boxes are selected:
On and Discoverable.
4. Click the checkbox next to
Show Bluetooth status in the menu bar.
5. Ensure the eXo is in paring mode by
follow the steps above entitled Paring
6. Click the Set Up New Device....
button and OS X will attempt to connect to
the mouse.
7. When the computer is paired with the eXo,
it will list it under Devices on the
Bluetooth® Setup Assistant window.
When this occurs, click on Continue.
8. The computer will finish pairing the eXo
and will indicate when the connection
has been made.
9. Re-opening the Bluetooth® preferences
window will show a list of all of the
connected devices.