D-Link DES-3010F Command Line Interface Manual page 121

enable address_binding trap_log
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable sending of IP-MAC Binding trap log messages on the Switch:
disable address_binding trap_log
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable sending of IP-MAC Binding trap log messages on the Switch:
DES-3000 Series Layer 2 Switch CLI Reference Manual
Used to enable the trap log for the IP-MAC binding function.
enable address_binding trap_log
This command, along with the disable address_binding trap_log
will enable and disable the sending of trap log messages for IP-MAC
binding. When enabled, the Switch will send a trap log message to
the SNMP agent and the Switch log when an ARP packet is received
that doesn't match the IP-MAC binding configuration set on the
Switch.
None.
Only administrator-level users can issue this command.
DES-3026:4#enable address_binding trap_log
Command: enable address_binding trap_log
Success.
DES-3026:4#
Used to disable the trap log for the IP-MAC binding function.
disable address_binding trap_log
This command, along with the enable address_binding trap_log
will enable and disable the sending of trap log messages for IP-MAC
binding. When enabled, the Switch will send a trap log message to
the SNMP agent and the Switch log when an ARP packet is received
that doesn't match the IP-MAC binding configuration set on the
Switch.
None.
Only administrator-level users can issue this command.
DES-3026:4#disable address_binding trap_log
Command: disable address_binding trap_log
Success.
DES-3026:4#
119