Table of Contents
Advertisement
2.7 CrossFireX
This motherboard supports CrossFireX
you to install up to two identical PCI Express x16 graphics cards. Currently
TM
CrossFireX
and Quad CrossFireX
64-bit / 8 / 8 64-bit OS.
1. You should only use identical CrossFireX
AMD certified.
2. Make sure that your graphics card driver supports AMD CrossFireX
technology. Download the drivers from the AMD's website: www.amd.com
3. Make sure that your power supply unit (PSU) can provide at least the
minimum power your system requires. It is recommended to use a AMD
certified PSU. Please refer to the AMD's website for details.
4. If you pair a 12-pipe CrossFireX
cards will operate as 12-pipe cards while in CrossFireX
5. Different CrossFireX
CrossFireX
installation guide.
2.7.1 Installing Two CrossFireX
CrossFire Bridge
TM
and Quad CrossFireX
TM
TM
are supported with Windows
TM
cards may require different methods to enable
TM
. Please refer to AMD graphics card manuals for detailed
Step 1
Insert one graphics card into PCIE2
slot and the other graphics card to
PCIE4 slot. Make sure that the cards
are properly seated on the slots.
Step 2
Connect two graphics cards by install-
ing a CrossFire Bridge on the Cross-
Fire Bridge Interconnects on the top
of the graphics cards. (The CrossFire
Bridge is provided with the graphics
card you purchase, not bundled with
this motherboard. Please refer to your
graphics card vendor for details.)
TM
Operation Guide
and Quad CrossFireX
TM
-ready graphics cards that are
TM
Edition card with a 16-pipe card, both
TM
TM
-Ready Graphics Cards
27
TM
that allows
®
7 / 7
TM
mode.
Hide quick links:
Advertisement
Table of Contents
