Activating/Deactivating Auto Answer; Changing The Handsfree/Earpiece Volume; Changing Ringtones - Gigaset C300 User Manual

Handset settings
The screensaver is not displayed in cer-
tain situations, e.g., during a call or if the
handset is de-registered.
To show the display in idle status, briefly
press end call key a.
Colour Schemes
You can set the display to be shown in
various colour combinations. Four colour
schemes are available.
Contrast
Nine contrast settings are available.
Backlight
Depending on whether or not the hand-
set is in the charger, you can activate or
deactivate the backlight (
If the display backlight In Charger is acti-
vated, the display is permanently
dimmed when the handset is in the
charger.
If the display backlight Out of Charger is
activated, the handset switches the dis-
play backlight to 10% of the maximum
brightness in 2 stages, when the handset
is out of the charger.
When the display backlight is switched
off, any key press will activate the back-
light and perform the relevant key func-
tion.
Please note
If the backlight is turned on outside
the charging cradle, the standby time
for the handset is considerably
reduced!
Activating/deactivating auto
answer
If this function is activated, you can simply
lift the handset out of the charger without
having to press the talk key c when you
receive a call.
¤ Settings ¤ Telephony
§Menu§
¤ Auto Answer
§OK§
Press display key (
50
³
= on).
³
= on).
Changing the handsfree/
earpiece volume
You can set the volume for handsfree mode
and earpiece mode to five different levels.
In idle status:
t ¤ Call Volume
Earpiece Volume / Handsfree Volume
Select and press
q
Set the volume
(e.g., volume 3 = ‰ ).
§OK§
Press the display key to save the
setting.
During a conversation via the earpiece or in
handsfree mode:
t
Press the control key to open
the menu for setting the vol-
ume. Set the earpiece or hands-
free volume by pressing q.
The setting will automatically be saved after
approximately 3 seconds, if not then press
§OK§
the display key .
Please note
You can also set the call volume using the
menu (¢ page 24).

Changing ringtones

u Volume:
You can choose between five volumes
(e.g., volume 2 = ˆ ) and the "cre-
scendo" ring (volume increases with
each ring = ‡ ).
u Ringtones:
You can select a ringer from a list of pre-
loaded melodies.
You can set different ringtones for the fol-
lowing functions:
u Internal calls
u External calls:
u Alarm clock
§OK§
.