Engine Coolant Check; Checking The Coolant Level - Ford Mondeo Owner's Handbook Manual

Hide thumbs Also See for Mondeo:
Table of Contents

Advertisement

Note: Check the level before starting
the engine.
Note: Make sure that your vehicle
is on level ground.
Note: Oil expands when it is hot. The
level may therefore extend a few
millimetres beyond the MAX mark.
Remove the dipstick and wipe it with
a clean, lint free cloth. Replace the
dipstick and remove it again to check
the oil level.
If the level is at the MIN mark, top up
immediately.
Topping up
WARNINGS
Only top up when the engine is
cold. If the engine is hot, wait 10
minutes for the engine to cool down.
Do not remove the filler cap
when the engine is running.
Remove the filler cap.
CAUTION
Do not top up further than the
MAX mark.
Top up with fluid that meets the Ford
specification. See Technical
specifications (page 216).
Maintenance
ENGINE COOLANT
CHECK

Checking the coolant level

happens, rinse the affected areas
immediately with plenty of water and
contact your doctor.
marks.
Note: Coolant expands when it is
hot. The level may therefore extend
beyond the MAX mark.
If the level is at the MIN mark, top up
immediately.
Topping up
minutes for the engine to cool down.
the engine to cool down.
Unscrew the cap slowly. Any
pressure will escape slowly as you
unscrew the cap.
214
WARNING
Do not allow the fluid to touch
your skin or eyes. If this
CAUTION
Make sure that the level is
between the MIN and the MAX
WARNINGS
Only top up when the engine is
cold. If the engine is hot, wait 10
Do not remove the filler cap
when the engine is running.
Do not remove the filler cap
when the engine is hot. Wait for

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents