System Check - Cradlepoint MBR1000 User Manual

CradlePoint MBR1000 | USER MANUAL _ Firmware Version 1.3.1
TOOLS
6.8 SYStem check (ping teSt).
Use the System Check sub-menu as a diagnostic tool to check connectivity
from the router to another computer. This function can be used to verify a
working connection across the WAN network or the local network. NOTE: the
ping target must be configured to respond to ICMP ping requests.
6.8.1 ping teSt.
Host Name or IP Address. Enter either the IP address of the target computer
or enter its fully qualified domain name.
• Ping. Start pinging the specified host.
System Check (Ping Test) screen
• Stop. The host is pinged repeatedly until you click the button.
Stop
6.8.2 ping reSuLt.
Displays the results of the ping test. The ping test is an ICMP echo protocol. It's used to test response and path to a remote computer system, i.e., a
ping to a URL "www.xxxxx.com" will tell you if there is a path and if the remote computer is responding. NOTE: Not all devices respond to pings.
Example:
• Host Name or IP Address:
www.whitehouse.gov
• Ping Result
Please wait, resolving www.whitehouse.gov....
Resolved to 205.161.7.102.
Response from 205.161.7.102 received in 7 milliseconds.
Response from 205.161.7.102 received in 6 milliseconds.
Response from 205.161.7.102 received in 7 milliseconds.
User stopped ping.
Table of Contents
PAGE 83