Networking Basics; Check Your Ip Address - D-Link DIR-600 User Manual

Appendix B - Networking Basics

Networking Basics

Check your IP address

After you install your adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server
(i.e. wireless router) automatically. To verify your IP address, please follow the steps below.
Click on Start > Run. In the run box type cmd and click OK. (Windows Vista
users type in the Start Search box.)
®
At the prompt, type ipconig and press Enter.
This will display the IP address, subnet mask, and
the default gateway of your adapter.
If the address is 0.0.0.0, check your adapter
installation, security settings, and the settings on
your router. Some irewall software programs may
block a DHCP request on newly installed adapters.
D-Link DIR-600 User Manual 67