Measurements; Normal Measurement - A&D UB-510 User Manual

A&d medical wrist digital blood pressure monitor

Hide thumbs Also See for UB-510:

Table of Contents

Note: The UB-510, once used, will provide an inflation appropriate to the user, based on the previous measurement.

1. Sit comfortably with the cuff at the same level as your heart

and relax.

2. Press the START button.

The average recorded blood pressures and data number are

displayed briefly.

Then the display changes as indicated in the figure on the

right as measurement begins.

The cuff starts to inflate. It is normal for the cuff to feel very tight.

Note: If you wish to stop inflation at any time, press the START

button again.

3. The measurement starts automatically when pressurizing

starts, and the

4. When measurement is complete, the systolic and diastolic

pressure readings and pulse rate are displayed.

The cuff exhausts the remaining air and completely deflates

automatically.

5. Press the START button again to turn off the power.

Remove the cuff.

Note: The device is provided with an automatic power shut-off

function.

Allow at least ten minutes between measurements on

the same person.

Measurements

(heart mark) blinks.

Table of Contents