Shooting Mode - Nikon Coolpix 55200 Quick Start Manual

I
Step4
Turn On the Camera
Press the power switch to turn on the camera.
• The power-on lamp (green) will light and then the
monitor will turn on (the power-on lamp turns off when
the monitor turns on).
~
Power Saving Function (Auto Off)
If no operations are performed for a while, the monitor will turn off, the camera will enter
standby mode, and the power-on lamp will flash. If no operations are performed for
approximately another three minutes, the camera will turn off automatically.
While the camera is ir1 standby mode, the monitor turns back on if you perform any of the
following operations:
--->
Press the power switch, shutter-release button,
Q
(shooting mode) button, [E) (playback)
button,
ore
(~If
movie-record) buttor1
First Steps
StepS
Select a Language and Set the Camera Clock
When the camera is turned on for the first time, the language-selection screen and
the date and time setting screen for the camera clock are displayed.
Use the mJiti selector to make the settings.
5.1
The Multi Selector
Press the multi selector up(...._), down (T), left (<IIIII), or
right(~), or press the® button.
Selects the 1tcm \
above. .A
Selects the item to
~
'\ Selects the 1tem to
the left returns to
-"ittl
~~ ~121 )~--
the nght cont1nues
the prev1ous screen.
l'J
to the next screen
Selects the 1tem
T, """"
Appl1es the current
below.
J
selection.
Press
.A. or "Y
to select the deSired
language and press the@ button.
5.2
f'ress
.A.
or
"Y
to select Yes a11d press
the@ button.
First Steps
I