Network Filters - D-Link DIR-825 User Manual

Secton  - Configuraton
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses
from accessing the network. You can either manually add a MAC address or select the MAC address from the list of
clients that are currently connected to the Broadband Router.
Configure MAC Select.Turn.MAC.Filtering.Off, Allow.MAC.
Filtering: addresses. listed. below, or Deny. MAC.
addresses.listed.below from the drop-down
menu.
MAC Address:
Enter the MAC address you would like to
filter.
To find the MAC address on a computer,
please refer to the Networking Basics section
in this manual.
DHCP Client:
Select a DHCP client from the drop-down menu
and click << to copy that MAC Address.
Clear:
Click to remove the MAC address.
D-Lnk DIR-825 User Manual

Network Filters