Specifications - Dixon ZTR RAM SERIES Safety And Operation Manual

SPECIFICATIONS

Chassis: 1-1/2 X 3 rectangle tube side frame
Mower Deck: 11 GA fabricated construction with reinforced ribs.
Available in 44" and 50" cut widths.
Blade Drive: Electric clutch.
Transmission: Each rear wheel is independently driven by a Hydro
Gear IZT hydrostatic drive with integral charge pump
and 7" cooling fan.
Engine: Each mower (44" or 50") is powered with either a
19 HP Kawasaki, 20 HP Honda or a 20 HP Kohler
twin cylinder engine, overhead valve, air cooled,
gasoline, full pressure lube with oil filter, vertical
shaft, aluminum head and block with cast-iron
cylinder liners.
Starting Electric-key switch operation with safety interlock
System: blade drive.
Tires: Front - 11x4.00-5 -- 5 smooth tread (16-21 PSI)
Rear - 18x9.50-8 -- 4 ply turf tread (8-14 PSI)
Capacities: Fuel
Engine Oil
Dimensions: Width
Height
Length
Weight
Additional information may be provided elsewhere in this manual.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
RAM MAG™
5.5 gallons
2 quarts
44" maximum track width
39" to top edge of seat
69" hitch tab to front bumper
Power Unit - 484 lbs
with 44" Deck--600 lbs
with 50" Deck--620 lbs
19