Message
Time Out
•
A Solve calculation or integration
calculation was unable to satisfy
convergence conditions.
Circular
•
There is a circular reference
ERROR
(such as "=A1" in cell A1) in the
spreadsheet.
Invalid Name
•
The file name you input includes
invalid characters.
Invalid Type
•
An illegal data type is specified.
Storage
•
The storage memory is full.
Memory Full
No Card
•
There is no SD card loaded in the
calculator.
SD Card Full
•
The SD card is full.
Invalid file
•
Data or folders that are supported
name or folder
by this calculator cannot be found
name.
on the SD card.
Invalid Card
•
A card that is not compatible with
the calculator is loaded.
Card is
•
The SD card is write protected.
protected
Data ERROR
•
A data error occurred.
Card ERROR
•
An SD card error occurred.
Data is
•
The Read Only attribute of the SD
protected
card loaded in the calculator has
been turned on using a computer,
etc.
CSV error
•
The imported CSV file included data
in row [A] or
that cannot be converted.
column [B]
Meaning
α
-6
Countermeasure
•
If you are performing a Solve
calculation, try changing to the
initial default estimated value.
•
If you are performing an
integration calculation, try
changing to a larger
•
Change cell contents to remove
the circular references.
•
Use the correct characters to
input a valid file name.
•
Specify valid data.
•
Delete unneeded data.
•
Load an SD card.
•
Delete unneeded data.
•
Replace the card with one that
contains data/folders that are
supported by this calculator.
•
Replace the card with a
compatible card.
•
Remove write protection.
•
Check to make sure you are
writing correct type of data and try
again.
•
Remove and correctly insert the
SD card and try again. If this error
occurs again, re-format the SD
card.
•
Turn off the SD card's Read Only
attribute.
•
Use your computer to check the
row A, column B data in the file
and change it to data that can be
converted.
tol
value.