Function; Zone2 Set; Display Set; Dimmer (Front Display) - Yamaha RX-V777 Owner's Manual

■

Zone2 Set

Configures the Zone2 settings.
Max Volume
Sets the Zone2 maximum volume to prevent excessive loudness.
Setting range
-30.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB
• This setting is available only when "Power Amp Assign" (p.100) is set to "7ch +1ZONE".
Initial Volume
Sets the Zone2 initial volume for when the unit is turned on.
Settings
Sets the level at the volume level of the unit when it last entered standby
Off
mode.
Sets at Mute or the specified volume level (-80 dB to +16.5 dB, 0.5 dB
On increments).
(This setting works only when the initial volume is set lower than "Max Volume".)
• This setting is available only when "Power Amp Assign" (p.100) is set to "7ch +1ZONE".
Zone Rename
Changes the zone name (for Zone2) displayed on the TV screen.
You can change the zone name in the same manner as "Zone Rename" in "Main
Zone Set" (p.109).
■

Party Mode Set

(RX-V777 only)
Enables/disables switching to the party mode (p.82).
Choice
Target: Zone 2
Settings
Disable Disables switching to the party mode.
Enables switching to the party mode. You can turn on/off the party
Enable
mode by pressing PARTY on the remote control.

Function

Configures the functions that make the unit easier to use.
■

Display Set

Configures the settings related to the front display and TV screen display.

Dimmer (Front Display)

Adjusts the brightness of the front display.
Setting range
-4 to 0 (higher to brighten)
• The front display may become dark when "ECO Mode" (p.113) is set to "On".

Short Message

Selects whether to display short messages on the TV screen when the unit is
operated (such as input selection and volume adjustment).
Settings
On Displays short messages on the TV screen.
Off Does not display short messages on the TV screen.
Wallpaper
Selects the image to be used as wallpaper on the TV.
Settings
Picture 1, Picture 2, Displays the selected image on the TV screen when there is no video
Picture 3 signal.
Displays a gray background on the TV screen when there is no video
Gray
signal.
CONFIGURATIONS ➤ Configuring various functions (Setup menu)
110
En