Chrysler 300 2014 Owner's Manual page 99

M A I N T A I N I N G Y O U R V E H I C L E
Component
Automatic Transmission
Brake Master Cylinder
Power Steering Reservoir
• Mixing of engine coolant (antifreeze) other than specified Organic Additive Technology
(OAT) engine coolant (antifreeze), may result in engine damage and may decrease
corrosion protection. Organic Additive Technology (OAT) engine coolant is different
and should not be mixed with Hybrid Organic Additive Technology (HOAT) engine
coolant (antifreeze) or any "globally compatible" coolant (antifreeze). If a non-OAT
engine coolant (antifreeze) is introduced into the cooling system in an emergency, the
cooling system will need to be drained, flushed, and refilled with fresh OAT coolant
(conforming to MS-12106), by an authorized dealer as soon as possible.
• Do not use water alone or alcohol-based engine coolant (antifreeze) products. Do not use
additional rust inhibitors or antirust products, as they may not be compatible with the
radiator engine coolant and may plug the radiator.
• This vehicle has not been designed for use with propylene glycol-based engine coolant
(antifreeze). Use of propylene glycol-based engine coolant (antifreeze) is not recom-
mended.
E85 FLEXIBLE FUEL — 3.6L ENGINE ONLY
Refer to your Owner's Manual on the DVD for further details.
Only vehicles with the E-85 fuel filler door label or a yellow gas cap can operate on E-85.
Fluid, Lubricant, or Genuine
Part
Use only ATF+4® Automatic
Transmission Fluid. Failure to
use ATF+4® fluid may affect
the function or performance of
your transmission. We recom-
mend MOPAR® ATF+4® fluid.
We recommend you use
MOPAR® DOT 3 and SAE
J1703. If DOT 3 is not available,
then DOT 4 is acceptable.
We recommend you use
MOPAR® Power Steering Fluid
+ 4 or MOPAR® ATF+4® Au-
tomatic Transmission Fluid.
CAUTION!
CAUTION!
Capacities
—
—
—
97