Table of Contents
Advertisement
* There are two LEDs on each LAN port. Please refer to the table below for the LAN port LED indications.
ACT/LINK LED
SPEED LED
LAN Port
Activity / Link LED
Status
Description
Off
No Link
Blinking
Data Activity
On
Link
** If you use a 2-channel speaker, please connect the speaker's plug into "Front Speaker Jack". See the table below
for connection details in accordance with the type of speaker you use.
Audio Output
Front Speaker
Channels
2
4
6
8
To enable Multi-Streaming, you need to connect a front panel audio cable to the front
panel audio header. After restarting your computer, you will find the "Mixer" tool on
your system. Please select "Mixer ToolBox"
ing", and click "ok". Choose "2CH", "4CH", "6CH", or "8CH" and then you are allowed
to select "Realtek HDA Primary output" to use the Rear Speaker, Central/Bass, and
Front Speaker, or select "Realtek HDA Audio 2nd output" to use the front panel audio.
Speed LED
Status
Off
Orange
Green
Rear Speaker
(No. 8)
(No. 6)
V
--
V
V
V
V
V
V
Description
10Mbps connection
100Mbps connection
1Gbps connection
Central / Bass
(No. 5)
--
--
V
V
, click "Enable playback multi-stream-
Z97 Pro4
Line In
(No. 7)
--
--
--
V
13
Hide quick links:
Advertisement
Table of Contents
