Control Settings - Hotpoint HDA1000 Owner's Manual

Control Settings

Cycles
1
POTS & PANS/ For heavily soiled dishes or cookware with dried-on
HEAVY WASH or baked-on soils. Everyday dishes may be included.
NORMAL WASH For loads of everyday dishes, glasses and cookware
SHORT WASH For quickly washing loads of everyday dishes with
LIGHT WASH/ For dishes with light soils.
WATER SAVER
RINSE & HOLD For rinsing partial loads that will be washed later.
PLATE WARMER For warming clean dishes and serving plates. This
Make sure the Dial is at the OFF position.
Energy Options
2
HI TEMP Provides extra heat for best performance. It is used
WASH ON/ best with heavily-soiled dishes.
HI TEMP WASH
HI TEMP Turns HI TEMP WASH off.
WASH OFF
HEATED DRY/ Turns the heating element on for fast drying. This
HEATED DRY ON option will extend the time of your wash cycle.
HEATED DRY OFF Turns HEATED DRY off . Dishes air dry naturally
ENERGY SAVER Turns all options off.
Start
3
Slowly turn the Dial to the START or ON position. Don't
turn it past the START or ON position, or you could
accidentally miss a rinse. There is a time delay between
start-up and water fill so you will not hear any wash
action right away.
Latch the door.
This cycle will not remove burned-on foods.
with medium soils. NOTE: Many dishes have lighter
soil than normal. Choosing a cycle other than
NORMAL WASH will save energy and water.
medium soils that have not dried on, such as loads
consisting mostly of glasses.
Do not use detergent.
cycle will take approximately 32 minutes.
and energy is saved.
9