D-Link AirPlus G DWL-G630 Manual page 21

Using the Confi guration Utility (continued)
Adhoc Channel:
All devices in the Ad-Hoc
network must be set to the
same channel.
Profi le IP Settings:
You can Enable or Disable
the IP Settings portion of your IP Settings portion of your IP Settings
profi le here. If you select Dis-
able you will need to confi g-
ure the IP address information ure the IP address information
each time you connect to a
network. If you select Enable
you will maintain the same IP
address information each time address information each time
you connect to a network.
Power Mode:
Disable - This default setting consumes the most power.
Enable - This setting consumes the least power.
Launch Utility on Startup:
Select Enable or Disable.
Data Packet Parameter:
Set the Fragmentation Threshold and the Fragmentation Threshold Fragmentation Threshold and the
Fragmentation Threshold:
This value should remain at its default setting of 2432. If you experience a
high packet error rate, you may slightly increase your fragmentation threshold
within the value range of 256 to 2432. Setting the fragmentation threshold too
low may result in poor performance.
RTS Threshold:
This value should remain at its default setting of 2432. If inconsistent data
fl ow is a problem, only a minor modifi cation should be made.
Click Apply if you have made any changes.
Advanced
RTS Threshold. Please see below.
21