Specifications - Behringer
Ultravoice Digital VX2496 Technical Specifications

SPECIFICATIONS

AUDIO INPUTS
MIC XLR connector, HF shielded, balanced
Line XLR connector and 1/4" jack
HF shielded, balanced
Insert Return 1/4" jack unbalanced
Impedance
MIC 1.3 kΩ unbalanced, 2.6 kΩ balanced
Line XLR connector and 1/4" jack
10 kΩ unbalanced, 20 kΩ balanced
Insert Return 10 kΩ unbalanced
Max. Input Level
MIC +11 dBu unbalanced and balanced
Line XLR and jack +21 dBu balanced
and unbalanced
Insert Return +21 dBu
CMRR typical 40 dB, >60 dB @ 1 kHz
(except Insert Return)
AUDIO OUTPUTS
Recording Out XLR Electronically controlled servo-balanced
output stages
Main Out XLR Electronically controlled servo-balanced
output stages
Main Out Jack 1/4" jack
Impedance
Rec. Out 120 Ω balanced, 60 Ω
@ 1 kHz
Main Out XLR 120 Ω balanced, 60 Ω unbalanced
@ 1 kHz
Main Out Jack 100 Ω unbalanced @ 1 kHz
Insert Send 100 Ω unbalanced @ 1 kHz
Output Level
Rec. Out max. +21 dBu balanced and unbalanced
Main Out XLR max. +21 dBu balanced and unbalanced
Main Out Jack max. +21 dBu unbalanced
Insert Send max. +21 dBu unbalanced
SYSTEM DATA
Bandwidth 20 Hz to 20 kHz, +0/-0.6 dB
Frequency Response Line: <10 Hz to >200 kHz,
+0/-1.7 dB -> Main Out
MIC: <10 Hz to >200 kHz,
+0/-2.5 dB -> Main Out
S/N Ratio 123.6 dB dynamics -> Insert Send
118.5 dB dynamics -> Main Out
122 dB dynamics -> Recording Out
130 dB E.I.N, Mic In -> Insert Send
105 dB Line -> Insert Send @ +4 dBu/1 kHz
THD 0.006% typ. @ -30 dBu, 1 kHz,
Gain 30 dB, Mic In -> Insert Send
0.01% typ. @ -30 dBu, 1 kHz,
Gain 30 dB, Mic In -> Main Out
0.001% typ. @ +4 dBu, 1 kHz,
Unity Gain, Line In -> Insert Send
0.004% typ. @ +4 dBu, 1 kHz,
Unity Gain, Line In -> Main Out
DIGITAL OUTPUT
Type High-resolution 24-bit AKM A/D converter
Standard AES/EBU / XLR transformer-balanced
Output Impedance 110 Ω balanced
Nom. Output Level 5 V peak-to-peak
INTERNAL SAMPLING FREQUENCY
44.1 / 48 / 88.2 / 96 kHz (switchable)
WORDCLOCK INPUT
Type
Frequency Range
Input Impedance
Nom. Input Level
ULTRAVOICE DIGITAL VX2496
unbalanced
unbalanced
BNC
31 to 100 kHz
100 kΩ
2 to 5 V peak-to-peak
EXPANDER/GATE SECTION
Type
Threshold
Ratio
Attack
Release
COMPRESSOR SECTION
Type
Threshold
Ratio
Manual Release Time
Manual Attack Time
Output
DE-ESSER SECTION
Type
Filter Frequency
Filter Quality
Attenuation
TUBE EMULATION SECTION
Filter Frequency
Characteristic
Boost
VOICE-OPTIMIZED EQ SECTION
Bands
Filter Quality
Filter Frequencies
POWER SUPPLY
Mains voltage
Power Consumption
Fuse
Mains Connection
DIMENSIONS (H x W x D)
WEIGHT
SHIPPING WEIGHT
BEHRINGER makes every effort to ensure the highest standard of quality. Necessary
modifications are carried out without notice. Thus, the specifications and design of the device
may differ from the information given in this manual.
RMS Expander
variable (OFF to +10 dB)
Expander: variable (1:1 to 3:1)
Gate: 1:oo
<1 msec / 20 dB, fixed
100 msec / 20 dB, fixed
Opto Compressor
variable (-25 to +10 dB)
switchable (3:1 / 9:1)
variable (10 dB / 10 msec
to 10 dB / 1.5 sec)
10 dB / 10 msec
Fast: 20 dB / 10 msec
variable (0 bis +20 dB)
VAD (Voice-Adaptive)-De-Esser
2.7 to 12 kHz
program-dependent, max. Q = 4
max. 18 dB
variable, 800 Hz to 12kHz
Peak Frequency
Full Bandwidth,
lower Cut-off Frequency = 200 Hz
Band Pass, 1st Order
(6 dB/Oct.)
Full Bandwidth:
High Pass, 1st Order
(6 dB/Oct.)
variable, max. 20 dB
3
Boost: 0.4 / Cut: 3
Breath: Type shelving,
lower Cut-off Frequency 10 kHz
Presence: Type peak,
Peak Frequency 1.5 kHz
Warmth: Type peak,
semiparametric
Peak Frequency variable from
130 to 720 Hz
USA/Canada
120 V~, 60 Hz
Europe/U.K./Australia
230 V~, 50 Hz
Japan
100 V~, 50 - 60 Hz
General export model
120/230 V~, 50 - 60 Hz
max. 25 W
100 - 120 V~: T 630 mA H
200 - 240 V~: T 315 mA H
Standard IEC Receptacle
approx. 1 ¾" (44.5 mm) x
19" (482.6 mm) x 8 ½" (217 mm)
approx. 2.2 kg
approx. 3.4 kg
3