Lan Setup - D-Link DSL-321B User Manual

Section 3 - Configuration

LAN SETUP

You can configure the LAN IP address to suit your preference. Many users will find it convenient to use the default settings together with DHCP
service to manage the IP settings for their private network. The IP address of the Router is the base address used for DHCP. In order to use the
Router for DHCP on your LAN, the IP address pool used for DHCP must be compatible with the IP address of the Router. The IP addresses
available in the DHCP IP address pool will change automatically if you change the IP address of the Router.
To access the LAN Setup setting window, click on the LAN Setup button in the SETUP directory.
ROUTER SETTINGS
To change the Router IP Address or Subnet Mask, type in the desired
values.
DHCP Mode
The Enabled is selected by default for the Router's Ethernet LAN
interface.
If you don't want DSL-321B to be the DHCP server, you can click
Disabled radio to disable current DHCP server.
To use outside DHCP server, click Relay radio, and input DHCP Relay IP
address.
D-Link DSL-321B User Manual 26