Lenovo ThinkCentre 1982 Hardware Maintenance Manual page 135

7. Install the screw to secure the card reader bracket to the chassis.
Figure 61. Installing the screw that secures the card reader
8. Pivot the optical drive bay upward and connect the card reader cable to one of the USB connectors on
the system board. See "Locating parts on the system board" on page 77.
9. Reinstall the front bezel. See "Removing and reinstalling the front bezel" on page 122.
Note: You might have to remove the card reader cover
cover, pivot the two retaining clips
disengage the card reader cover from the front bezel.
Figure 62. Removing the card reader cover
10. To complete the installation or replacement, go to "Completing the parts replacement" on page 160.
Replacing the card reader
To replace the card reader, do the following:
.
Chapter 9 Replacing FRUs (Machine Types: 1996, 1997, 2002, 2010, 2208, 2209, 2221, 2224, 2226, and 2227.)
2 from the front bezel. To remove the card read
1 that secure the card reader cover outwards and then completely
131