Advanced; Port Forwarding Rules - D-Link DIR-100 User Manual

Section 3 - Configuration
Port Forwarding can be used to open a port or range of ports to a device on your network . To use them, click the
checkbox to Enable the entry, select a pre-defined service from the Application Name drop down menu, select a
computer from the Computer Name drop down menu, and click Save Settings. The Application, Computer, and Ports
can also be filled in manually if your Application or Computer is not listed in the drop down menus.
Name:
The name for the service being provided by the
device on your LAN that uses the ports being
opened.
IP Address:
The server computer on the LAN network that
the specified ports will be opened to.
Application
This contains a list of pre-defined services.
Name:
Computer
This contains a list of the devices on your
Name:
network which have obtained an IP Address
from the router.
Port:
The port number that users on the Internet will
use to access the defined service.
Protocol Type:
The protocol used by the service the device on
your LAN is providing.
Schedule:
The schedule may be set to Always, which
will allow the particular service to always be
enabled. You can create your own times in the
Tools > Schedules section.
D-Link DIR-100 User Manual

Advanced

Port Forwarding Rules

26