Eureka 4320 Series Owner's Manual page 6

Step C Store Hose and Accessories
Back View of
handle and
tools on some
models
Upholstery
Nozzle
Dusting
Brush
Carrying
Handle
Extension
Wand or
Wands
HEPA Filter
(on some
models)
Tabs
Hose
Retainer
Step E Store Electrical Cord
11
Cord
Retainer
6
Combination
Tool
Hook
Crevice
Tool
11
Cord
Retainer
12
Cord
Hook
12
Cord
Hook
Step D Check Disposable Dust Bag
8
10
8. Remove front cover, grasp both sides of bag cover
near top. Push thumbs against center of cover and
pull out on sides.
9
Hose
Adapter
9. Check to be sure the paper bag collar is secure with
the hose adapter inside the paper bag collar.
10. Replace front bag cover.
11. You will find your cord retainer either at the bottom
of the upper cord hook or on the handle above the
upper cord hook. Firmly push the electrical cord
down into either cord retainer. This will place the
cord out of the way the next time you vacuum.
12. Next wind the cord around the two cord hooks on
the left side of cleaner. On some models the upper
cord hook turns to release the cord. Turn the hook
up to store the cord.
NOTE: For easier access to bag compartment, when
you store the electrical cord use a figure 8
pattern.
13. Secure the plug to the cord to prevent unwinding.
Paper Bag Collar