Eclipse CD7200 mkII Reference Manual page 75

Listening to CD
II
Press the [
~
(OPEN/EJECT)]
button.
The front panel opens.
If a disc has already been loaded, the
disc will be ejected.
I!Ilnsert a CD into the disc slot, label
II
side up.
The front panel automatically closes
and the CD will immediately start
playing.
rnATTENTION
• Playback may be intermittent when there is
a scratch on a CD or when the recorded
side is dirty.
• If a CD has already been loaded, press the
[SOURCE/PWR] button for less than one
second to switch to the CD mode. (For
details, refer to "Switching Audio Modes" on
page 18.)
~CAUTION
Do not press the [ ~ (OPEN/EJECT)]
button while a CD is being loaded. This
could cause injuries or damage to the front
panel.
NOTE
• When music data recorded in the normal
way (CD-DA) is present on the same disc
with MP3/WMA music files, the normally
recorded music data will be played. To
listen to the MP3/WMA music files, press
[MODE] button for more than one second.
• MP3/WMA files which are not supported
cannot be played. In this case, [NO
SUPPORT] is displayed .
• The optional CD changer cannot be used to
play MP3/WMA files.
How to operate the CD/MP3/WMA player
TRACK (FILE) UP/DOWN
CD, MP3IWMA
II
Briefly press the [SELECT] (Right!
Left) button.
o
(Right):
Advances to the next track.
o
(Left):
Returns to the beginning of the
track being played.
CD (Rotary mode)
a
Turn the [VOL] button.
CD
(Right):
Advances to the next track.
a
(Left):
Returns to the beginning of the
track being played.
MP3IWMA (Rotary mode)
1
Press the [MODE] button for less
than one second to display the file
list.
I ! I Turn the [VOL] button to select the
II
file.
CD
(Right):
Advances to the next track.
e
(Left):
Previews previous tracks.
II
Press the [ENTER] button.
27
•