Configure Wpa/Wpa2 Passphrase; Using The D-Link Wireless Connection Manager - D-Link DWA-556 User Manual

Section 4 - Wireless Security
Configure WPA

Using the D-Link Wireless Connection Manager

It is recommended to enable WPA-PSK on your wireless router or access
point before configuring your wireless adapter. If you are joining an
existing network, you will need to know the WPA-PSK passphrase being
used.
1. Open the Wireless Connection Manager by double-clicking on the
D-Link icon on your desktop.
2. Highlight the wireless network (SSID) you would like to connect to
and click Connect. If the network is using WPA-PSK, the screen (as
shown to the right) will appear.
3. Enter the WPA-PSK passphrase exactly as it is on your wireless router
or access point. Click the Show text in the password field box to see
the passphrase. Unchecking it will hide it.
4. Click OK to connect to the network. Allow up to 30 seconds to
connect.
If you would like to create a new network and enter the WEP settings,
refer to the next page.
D-Link DWA-556 User Manual
/WPA2 Passphrase
™ ™
41