Table of Contents
Advertisement
Connecting the Cables
1.
Place the monitor in a convenient, well-ventilated location near the computer.
2.
Before connecting the cables, route the cables through the cable routing hole in the center of the
stand.
3.
Depending on your model and configuration, connect either the DisplayPort, DVI, HDMI, or VGA
video cable between the PC and the monitor.
NOTE:
determined by the video cable used. The monitor will automatically determine which inputs have
valid video signals. The inputs can be selected by pressing the
through the On-Screen Display (OSD) feature by pressing the
●
For analog operation, connect the VGA signal cable to the VGA connector on the rear of
the monitor and the other end to the VGA connector on the computer (cable provided with
select models).
6
Chapter 2 Setting Up and Using the Monitor
The monitor is capable of supporting either analog or digital input. The video mode is
Input
button on the front panel or
Menu
button.
Hide quick links:
Advertisement
Table of Contents
