Advertisement
Advanced Features
Activity detection function
The SSC-DC590/DC593/DC593P/
DC598P provides an activity detection
function, which detects changes within
an area of the picture designated by the
user. When activity is detected, the
camera superimposes a blinking
"ALARM" indication on the video
monitor and outputs an alarm trigger
signal to external equipment. Up to
three user-defined detection areas can
be freely selected. The on-screen,
superimposed "ALARM" message is 10
seconds in duration, while the alarm
trigger signal output can be selected
within the range of 0.5 and 10 seconds.
Privacy Zone Masking
With the Privacy Zone Masking function,
unwanted or prohibited areas within an
image can be masked. Up to two
masking blocks can be freely selected
in width and height. The masking areas
are selectable from either the inside or
the outside of the masking blocks.
User-friendly operation
On-screen set up menu
Camera settings can be made through the on-screen menu using the cursor keys
on the side panel of the camera. Up to two customized settings can be stored in
the memory to quickly recall specific setup conditions.
Camera title indication
The SSC-DC590/DC593/DC593P/DC598P cameras also feature a camera title
indication function. To easily identify individual cameras, users can assign a title of
up to 24 characters to each unit, which can then be superimposed onto a video
monitor screen. The position of the superimposed title is selectable from OFF,
TOP LEFT, TOP RIGHT, BOTTOM LEFT, or BOTTOM RIGHT.
Menu operation buttons
Other Convenient
Features
DC servo/video servo lens connection capability
The SSC-DC590/DC593/DC593P/DC598P cameras are easily
connected to either DC-servo or video-servo lenses.
CS-mount
This range of Sony cameras can also be used with CS-mount
lenses, allowing for easy and precise back-focus adjustments.
AC 24 V/DC 12 V operation
The SSC-DC593 and SSC-DC593P accept both AC 24 V and
DC 12 V power sources and will automatically switch to the
appropriate mode upon receiving power.
Sync system
The sync system of these cameras can be switched between
internal lock and AC line lock. When AC line lock is selected,
the V-phase can be adjusted by ±90°.
Advertisement
