Adjusting The Projected Image; Raising The Projector Height; Lowering The Projector Height - Dell S300wi User Manual

To power off the projector quickly, press the Power button and hold for 1 second
3
while the projector's cooling fans are still running.
NOTE:
Before you turn on the projector again, wait for 60 seconds to allow the
internal temperature to stabilize.
Disconnect the power cord from the electrical outlet and the projector.
4

Adjusting the Projected Image

Raising the Projector Height

Raise the projector to the desired display angle, and use the front two tilt
1
adjustment wheel to fine-tune the display angle.
Use the two tilt adjustment wheel to fine-tune the display angle.
2

Lowering the Projector Height

Lower the projector, and use the front two tilt adjustment wheel to fine-tune
1
the display angle.
1
2
1
Front tilt adjustment wheel
(Angle of tilt: -1 to 4 degree)
2
Tilt adjustment wheel
1
2
1
Using Your Projector 29