Advertisement
Standalone 10/100 Mbs UTP-to-Fiber Bridging Media Converters
CLE-106X – Standalone UTP-to-Fiber Bridging Media Converters
•
Converters are Compliant with IEEE 802.3, 802.3u 10/100
Mbs Ethernet standards
•
148,800 packets/second forwarding rate at 100 Mbs and
14,880 pps at 10 Mbs
•
Switch for hard-setting (Forced) Full-duplex or Half-duplex
operation on fiber port
•
Models with Fiber connectors are compatible with
100BASE-FX
•
Converters are transparent to Full and Half-duplex traffic
•
UTP port connectors have MDI / MDI-X crossover switch
Ordering Information
Fast Ethernet
Media
Model Numbers
Types
CLE-1061
UTP / MM
CLE-1062
UTP / MM
Specifications above in blue are for multi-mode, fiber connectors.
CLE-1061S
UTP / SM
CLE-1062S
UTP / SM
CLE –106X models are available with long-reach single-mode connectors and Single-Fiber, Bi-Directional Connectors as special order. Please contact Canary for correct model numbers
and additional ordering information.
Illustrated: Bridging Media Converter
Min. Tx
Max. Tx
Rx
PWR
PWR
Sensitivity
-20.0 dBm
-14.0 dBm
-31.0 dBm
-20.0 dBm
-14.0 dBm
-31.0 dBm
Specifications below for single-mode, fiber connectors.
-15.0 dBm
-8.0 dBm
-34.0 dBm
-15.0 dBm
-8.0 dBm
-34.0 dBm
•
Full array of status / diagnostic LEDs
•
512 MAC address lookup table
•
Store-and-forward operation
•
MAC Layer Bridge
•
5K Byte buffer
•
IEEE 802. 1 D
•
Auto-sensing, 110 / 230 VAC Power Supply
• Additional models include: Single-Fiber Bi-Directional single-
mode and Extended Reach single-mode are available as special
order
Optical Specifications
Min. PWR
Max.PWR
Max. Input
Budget
Budget
PWR
11.0 dB
17.0 dB
-8.0 dBm
11.0 dB
17.0 dB
-8.0 dBm
19.0 dB
26.0 dB
-7.0 dBm
19.0 dB
26.0 dB
-7.0 dBm
Connector
Wavelengths
Type
(ηm)
SC
1310 ηm
ST
1310 ηm
SC
1310 ηm
ST
1310 ηm
Transmit
Distance
2000 m
2000 m
30 Km
30 Km
Advertisement
