Samsung 430 Series User Manual page 11

PC Display Modes (D-Sub and HDMI/DVI Input)
Optimal PC resolution is 1360 x 768@60Hz. You can also select one of the standard resolutions listed in the Resolution
column. The 1V will automatically adjust to the resolution you choose.
MAC
VESADMT
640
x
350 31.469 70.086
25.175 + /-
720
x
400 31.469 70.087
28.322 - / +
640
x
480 35.000 66.667 30.240
-
/
-
832
x
624 49.726 74.551 57.284
-
/
-
31.469 59.940 25.175
-
/
-
640
x
480 37.861 72.809 31.500
-
/-
37.500 75.000 31.500
-
/
-
37.879 60.317 40.000
+/+
800
x
600 48.077 72.188 50.000
+/+
46.875 75.000 49.500
+/+
48.363 60.004 65.000
-
/-
1024
x
768 56.476 70.069 75.000
-
/-
60.023 75.029 78.750
+/+
1360
x
768 47.712 60.015 85.500
+/+
~NOTE
• For HOMI/OVI cable connection, you must use the HDMI IN 1 (DVI) jack.
• The interlace mode is not supported.
• The set might operate abnormally if you select a non-standard video format.
• Separate and Composite modes are supported. SOG (Sync On Green) is not supported.
EX-LINK
I
(!)
J
Connector for service only.
EX-UNK
Source List
Changing the Input Source
SOURCE
~
Use to select 1V or an external input
source such as a OVO player I Blu-ray
player / cable box / STB satellite receiver.
1. Press the SOURCE button on your
remote.
2. Select a desired external input source.
• TV I PC I HDMI1/DVI I HDMI2 I AV1
I AV2 I Component1 I Component2
IUSB
~
You can only choose external devices that are
connected to the TV. In Source, connected inputs will
be highlighted.
~
If you want to see connected devices only, move to
Connected using the'" or ~ button.
~ PC always stays activated.
How to use Edit Name
Edit Name lets you associate a device name to an input
source. To access Edit Name, press the TOOLS button In
Source. The following selections appear under Edit Name:
• VCR I DVD I Cable STB I Satellite STB I PVR STB I
AV Receiver I Game I Camcorder I PC I DVI PC I DVI
Devices I TV IIPTV I Blu-ray I HD DVD I DMA:
Name the devices connected to the input jacks to make
your input source selection easier.
~
If you have connected a PC to the HDMIIN 1 (DVI)
port with an HOMI cable, select PC under Edit Name
to enter a device name.
~
if you have connected a PC to the HDMIIN 1 (DVI) port
with an HOMI to OVI cable, select DVI PC under Edit
Name to enter a device name.
~
If you connected an AV device to the HDMIIN 1 (DVI)
port with an HOMI to OVI cable, select DVI Devices
under Edit Name to enter a device name.
Information
You can see detailed information about the selected external
device.