How To Use This Manual - Kenwood VR-6070 Instruction Manual

Before applying the power
This manual is divided into four sections, Preparations, Operations,
Remote Control, and Additional Information
Preparations
Shows you how to connect your audio and video components to the
receiver and prepare the surround processor.
Since this receiver works with all your audio and video components, we
will guide you in setting up your system to be as easy as possible.
Operations
Shows you how to operate the various functions available on the
receiver.
Remote Control
Shows you how to operate other components using the remote control.
as well as a detailed explanation of all remote control operations. Once
you have registered your components with the proper setup codes, you'll
be able to operate both this receiver and your other AV components (TV,
VCR, DVD player, CD player, etc.) using the remote control supplied with
this receiver.
Additional Information
Shows you additional information such as "In case of difficulty" (trouble-
shooting) and "Specifications".
Maintenance of the unit
When the front panel or case becomes dirty, wipe with a soft, dry
cloth. Do not use thinner, benzine, alcohol, etc for these agents may
cause discoloration.
In regard to contact cleaner
Do not use contact cleaners because it could cause a malfunction. Be
specially careful not to use contact cleaners containing oil, for they
may deform the plastic component.
~
As an ENERGY STAR® Partner, Kenwood Corpora-
~
tion has determined that this product meets the
ENERGY STAR® guidelines for energy efficiency.
This product can save energy. Saving energy re-
duces air pollution and lowers utility bills.
Memory back-up function
Please note that the following items will be deleted from the unit's
memory if the power cord is disconnected from the AC outlet for
approximately 1 day.
For the U.S.A.
FCC WARNING
This equipment may generate or use radio frequency energy Changes
or modifications to this equipment may cause harmful interference
unless the modifications are expressly approved in the instruction
manual. The user could lose the authority to operate this equipment
if an unauthorized change or modification is made
NOTE:
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation This equipment may cause
harmful interference to radio communications, if it is not installed and
used in accordance with the instructions. However, there is no guaran-
tee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- - Reorient or relocate the receiVing antenna
- - Increase the separation between the equipment and receiver.
- - Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected
- - Consult the dealer or an experienced radio /TV techniCian for help.
For the U.S.A.
FCC Compliance Notice
Audio-video Receiver, VR-6070
These devices comply with Part 15 of FCC Rules. Operation is sublect
to the following two conditions (1) This device may not cause harmful
Interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation
KENWOOD U.S.A. CORPORATION
2201 East Dominguez St , Long Beach, CA 90801-5745
Telephone: 310-639-9000
For Canada
IC (Industry Canada) Notice
Operation is subject to the following two conditions:
(1)
This device
may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation
of the device
The term "IC:" before the certification/registration number only
signifies that the Industry Canada technical specifications were met
For the U.S.A.
Note to CA TV system installer
This reminder is provided to call the CATV system installer's attention
to Article 820-40 of the NEC that provides guidelines for proper
grounding and, in particular, specifies that the cable ground shall be
connected to the grounding system of the building, as close to the
point of cable entry as practical
• Power mode.
• Input selector settings.
• Picture output.
• Speaker ON/OFF.
• Volume level.
• BASS, TREBLE, INPUT level.
• TONE ON/OFF.
• LOUDNESS ON/OFF.
• Dimmer level.
• MDIT
APE settings.
• RF-BAND. (VR-6070 only)
• Listen mode setting.
• Speaker settings.
• SW RE-MIX ON/OFF
• Distance setti ng.
• Bass peak level.
• Input mode setting.
• Midnight mode setting.
• PRO LOGIC II mode setting.
• CS II mode setting.
• Broadcast band.
• Frequency setting.
• Preset stations.
• Tuning mode.
.THX mode.
• ACTIVE EO mode.
• SPEAKER EO mode.
• DSP mode.
J