GN-BR32L-RH 2.4GHz AirCruiser Ultra N Wireless Router
LEDs
The table below describes the LED indicators on the front
panel of the GN-BR32L-RH. All LEDs are green when lit.
LED
STATUS
On
Power
Off
WLAN
Flashing
On
Off
On
WAN
Flashing
WPS
Flashing
On
LAN
Flashing
When WLAN LED and WPS LED are flashing at the same time, the both
leds display might look like orange color from a distance.
Please be careful about the led color when troubleshooting.
Key Features
Web based Firmware upgrade
MDI/MDIX Auto crossover detect
LAN LED (4)
WAN LED
Figure 3: LED Layout
Color
Green
Power is supplied to the Router
N/A
Power is NOT supplied to the Router
Green
Data is being transmitted wirelessly
Green
No traffic
N/A
WLAN status idle
Green
WAN port has detected a wired link with a
DSL or Cable modem.
Green
Data is being transmitted / received
through WAN port.
Red
WPS function is active.
Note: if you hold the button over 4
seconds, the router will inactive WPS
function.
Green
LAN port has detected a link with a
10/100Mbps device
Green
Data is being transmitted / received
through LAN port.
4
Power LED
WLAN/WPS LED
DESCRIPTION