Alarm Output - Samsung SCU-2370 User Manual

setup
P(Priority) :
Set the priority of Alarm Inputs. If more than one alarm is simultaneously activated,
the alarm with the highest priority activates before the others. Once the alarm is canceled, the next
highest priority alarm activates.
SEQ. :
Enables setting up a sequence action for the camera in response to an alarm. Available sequence
actions are Preset, Swing, Group, Trace and A.Pan.

Alarm Output

Setting 1,2 :
Enables selecting an Alarm Output method.
- Optional items 1, 2, 3 and MD(TD) means alarm input
ports and motion/thermal detection input respectively. You
can set alarm outputs individually for 3 alarm inputs and
one MD(TD). Or, you can map 2 or more alarm inputs and
MD(TD) input to 1 alarm output port.
Timer 1, 2 :
- On : Retains an alarm output for a set duration from a
minimum of 1 second to a maximum of 60 hours upon
the alarm occurrence.
- MOMENT : Retains an alarm output only until the alarm is canceled.
- The Alarm Output is equipped with a relay circuit. The
operation of the alarm output port is as shown in the
diagram below. (Based on NO – Normal Open)
Alarm Out OFF
64_ setup
Alarm Out ON
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Status
Alarm Setting
Alarm Enable OFF
Alarm Input
Alarm Output
Aux Output
IR Illuminator
Alarm Output
Setting1 1 2 3 MD
Timer1 OFF
Setting2 1 2 3 MD
Timer2 OFF