Kensington Lock; Reset Button - Cisco 860 Series Hardware Installation Manual

Chapter 1 Product Overview
•
•

Kensington Lock

A Kensington security slot is located on the router back panel. To secure the router to a desktop or other
surface, use the Kensington lockdown equipment.

Reset Button

The Reset button resets the router configuration to the default configuration set by the factory. To reset
the hardware and its embedded wireless access point, simultaneously press the reset button while
applying power to the router.
Note When you reset the hardware when the embedded wireless access point is running Cisco Unified IOS
software, the router will shutdown but the access point will continue running. Clients with
Cisco Unified IOS software are controlled by a Wireless LAN Controller (WLC) and can only be reset
by the controller.
LEDs
The LEDs are located on the front panel of the router.
series and the Cisco 880 series ISRs.
Table 1-1 LED Descriptions for the Cisco 860 Series and Cisco 880 Series ISRs
LED Color
Power OK Green
1
Link Status FE 0 Green
Link Status FE1
Link Status FE2
Link Status FE3
FE WAN Port Link Green
Status
OL-16193-01
Wireless LAN Connectivity
Feature Summary
Description
On—DC power is being supplied to the router and the
Cisco IOS software is running.
Blinking—Bootup is in process, or the router is in ROMMON
monitor mode.
Off—Power is not supplied to the router.
On—Ethernet port is connected.
Blinking—Data is either being received or being transmitted.
Off—Ethernet port is not connected.
On—Port is connected.
Blinking—Data is either being received or being transmitted.
Off—Port is not connected.
Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide
Table 1-1 describes the LEDs for the Cisco 860
860 Series
All models
All models
861 models
Hardware Features
880 Series
All models
All models
881 models
1-9